Nice New Toyotas

Toyota Motor Corporation’s product liability for unintended acceleration and braking problems, which has reportedly led to 10 million recalls and counting, would eventually be found to be manufacturing and/or design safety defects.

From the reported accounts of several accidents involving sudden acceleration and brake failure, the safety defects may, hopefully for Toyota, be limited to accelerator-pedal trapping floor mats, sticking accelerator pedals, and inconsistent anti-lock brake systems (ABS), and not include defective electronic throttle control systems (ETCS) or stirring systems, on Corollas, Camrys, and other Toyota models.

Toyota’s global recalls have included Prius and Lexus hybrids, which indicate that the safety defects related to unintended acceleration and braking problems are systemic in nature.

Indeed, Toyota dealers nationwide have reportedly begun fixing accelerator pedals on recalled vehicles by installing a precision-cut reinforcement bar into the accelerator pedal assembly to eliminate the excess friction that has caused pedals to stick on occasions.

Dealers will also place reconfigured accelerator pedals and newly-designed floor mats on affected models to remedy floor mat pedal entrapment, and remedy the inconsistent brake feel of the anti-lock system (ABS) in 2010 Prious.

Moreover, Toyota will install a brake override system that cuts the engine on simultaneous application of accelerator and brake pedals. Even as Toyota is implementing the brake override system, it asserts that it “is confident that no defect exists in the electronic control unit (ECU).”

Manufacturing Versus Design Defects:

A. Manufacturing Defects:

The manufacturing process of a product consists of the formation, assembly, adjustment, combination, or processing of raw materials or ingredients according to the product design, per CCH, I Products Liability Reporter, Section 4785.
Thus, manufacturing defects may arise from improper formation, faulty assembly or adjustment, incorrect composition, or defective raw materials or component parts.

Toyota has identified the manufacturing defect that causes sticking accelerators as the: “friction device that includes a ’shoe’ that rubs against an adjoining surface during normal pedal operation. Due to the “materials used, wear and environmental conditions,” these surfaces may begin to stick…. In some cases, friction could increase to a point… that the pedal sticks, leaving the throttle potentially open.”

In one of the early Firestone cases filed by this Author in August 1999, with the Superior Court of Los Angeles County, the left rear tire of the injured family’s Ford Explorer, a 1994 Firestone Radial ATX, had its tread along with one steel ply coming off completely all the way around the tire.

It caused the 1995 Ford Explorer running at 65 miles per hour on US 101 Freeway in Solvang County, Santa Barbara, California to run out of control and overturn, injuring a couple and their two minor daughters in a nonfatal accident in August 1998.

Bridgestone/Firestone Inc., settled before trial based on the expert report of Transamerican Consultant Engineers, Inc., obtained by this Author, which concluded that: “(T)he cause of the tread separation was due to a poor bond between the steel plies due to failure of the brass plating on the wires to completely fuse with the sulfur in the rubber during the vulcanizing process.”

That case exemplified the manufacturing defect of incorrect composition or defective bonding materials.

B. Design Defects:

The designing of a product consists of the selection of materials and their intended construction as to size, shape, inclusion, and arrangement of component parts, per CCH, I Products Liability Reporter, Section 4745.

Thus, defects in design may take the forms of inadequacies in the plans or specifications, in the choice of materials for the product composition, or in the absence of safety devices or features.

Toyota’s installation of a precision-cut reinforcement bar into the accelerator pedal assembly is a design safety device to remedy sudden acceleration. And its reconfiguration of the shape of the accelerator pedal and newly-designed floor mats are likewise design remedies to avoid floor mat pedal entrapment. Moreover, the installation of a brake override system is another design safety feature.

The placement of fuel tanks close to the rear bumpers in Ford’s Pintos in the 1970’s, which in a 1978 case in Orange County, California, caused the gas tank to explode in a rear-end collision, exemplified the design defect of inadequate plans or specifications.

Defective vehicle design was also at issue in the January 2002 roll-overs of a 1997 Ford Explorer SUV, which left a mother of two paralyzed from the waist down when the Explorer’s roof caved in.

The San Diego jury found that Ford knew that the Explorer had design defects that increased its propensity to tip over, as well as its inadequate roof strength. The U.S. Supreme Court let stand the $82.6 million award to the paralyzed California women, which included $55 million in punitive damages.

Conclusion:

A vehicle recall is an admission of a defect or defects, whether manufacturing or design or both. Hopefully, the recall of Toyota vehicles would cure the defects. And Toyota would be liable only for the reduction in value and loss of use of the vehicle while being fixed. Otherwise, it may be liable also for punitive damages if it knew the defects all along.

For accident cases resulting in bodily injuries or deaths for sudden acceleration and failure of the brakes, the plaintiffs need to prove by a preponderance of the evidence either manufacturing or design or both defects through reconstruction and automotive experts.

Toyota Motor Corporation through their own experts will need to prove lack of defects or lack of causation for the injuries or death, that is, the loss of control of the Toyota vehicle was due to driver error. The jury and the appeal courts in case of appeals from the jury award or defense verdict will decide the outcome.

Our adversarial system of deciding legal disputes in courts would hopefully do justice to whom it is due.

(The Author, Roman P. Mosqueda, is the holder of a 1979 Doctor of Science of Law (S.J.D.) degree from The University of Michigan Law School, with a published doctoral dissertation on comparative product liability. He practices product liability, among other areas of law, in Southern California, based in Los Angeles.

For comments please email to rpm_law@yahoo.com or call his office at (213) 252-9481. Please feel free to visit http://www.mosquedalaw.com to know more about the Author’s practice.

This article is not meant to give legal advice, but is for information only. The reader with specific product liability issues is well-advised to seek the services of a competent product liability attorney.)

Atty Roman P. Mosqueda

The 2010 Toyota Venza is the finest car if you like the quintessential twenty-first century big station wagon – and aren’t afraid of latest safety recalls from Toyota.. You don’t want to be be seen in a minivan. Big SUV are antisocial and are fuel eaters. Family sedan? Pretty boring. Wagons are simply weird to be driven today. Now, consider the car that blends the handling easiness of a sedan, the full scale utility of a station wagon, and the higher seating position of an AWD SUV. Well, the name of this perfect blend is the 2010 Toyota Venza.

2009 and 2010 Venzas were added in accidental acceleration Toyota’s recalls for a replacement driver’s floor mat that will not interfere with the accelerator pedal. Despite of this, Venza was not listed for the sticky accelerator pedal. However, previous model year’s Venzas were announced for recall to add an electronic unit that enables brake pedal to override the gas pedal. This way, once you press the brake, any acceleration force will be ceased. New 2011 Venzas will come with preinstalled the brake-override system and Toyota threw it into production process during current year. Do not buy a 2010 Venza without confirming that it owns the brake-override.

Should you purchase a 2010 Toyota Venza or postpone until 2011 model year will be in the dealer’s showrooms? Since the 2010 Venza you are going to purchase has the brake-override device, there is absolutely no reason to postpone. Nothing else has been changed for the 2011 production year. However,there are the chances, that this perfect and spacious 5-passenger crossover wagon will get a moderate face lifting for 2012 MY. What does it mean for you? Nothing, just the look and feel of 2011 Venza would be outdated in the next two years.

Your Venza would feel fresher and ought to carry beautiful discounts because Toyota attempts to compensate for sales suffered during the recall. The most effective way to acquire the full value from either a 2010 or 2011 Venza would be to drive it for more than 5 years or so. That is beyond the point at which resale value would be tarnished by the unintended acceleration controversy. A full makeover will not occur before the 2014-2015 years.

Toyota has sworn to sooner or later make all vehicle in its model line available with a hybrid engine. That project has been postponed but not closed because of economic crisis that has all car maker rethinking their production plans. Anyway, the Venza will be, certainly, somewhat far down on the list of models to be equipped with a hybrid power-train.

John Dexter Doe

It happened again, just as Toyota is doing everything to do some damage-control in the US, it has now happen in Europe and Asia. For those of you who have no idea whats going on, the problem with the worlds biggest car manufacturer is the defective gas pedals that initiate out of control acceleration.

The report comes at a very bad time for Toyota where it had previously halt production from a few of its factories in North America. The recall has spread to Europe in view of the fact that the defective accelerator pedals were also used in Toyota’s European market.

Its bad enough that Toyota had suffered a blow in their sales because of the global financial crisis but this adverse turn of event will not only further jeopardize their profit but will also place a big scar on their reputation as a maker of top-notch quality cars with dependable attributes. The cost in fixes each month will also cost Toyota hundreds of millions of dollars and this controversy has given other car manufacturers an edge.

In the US, a number of disasters involving Toyota cars have previously happened which caused fatalities. One very troubling one came from a 911 call in the San Diego, California where 4 individuals in a Lexus crashed because of a stuck gas pedal.

It is reported that an estimated 1.8 million vehicles will be recalled in Europe, including the UK, bad news doesn’t stop there. The pending recall in China is also said to total over 75,000 mainly for Toyota RAV4s. All have the same issue of faulty gas pedals.

Can the faulty accelerator pedal be blamed completely to Toyota? Toyota may be receiving the brunt of this controversy but a notable detail is that Toyota gets their gas pedals from a third party supplier, CTS Elkhart. Even though CTS has already made attempts to replace the faulty gas pedals, the reputation of Toyota has already been dented, possibly irreparable.

Toyota has also cautioned drivers of floormats trapping accelerator pedals.

a number of~various~a few} complaints. One of which is in Southeast Asia where several Toyota Innova drivers are complaining about D4D fuel pumps where the MUV has a possible tendency to stop suddenly without the driver braking.

Toyota’s embarrassment doesn’t finish there, there are now reports of a new round in recall and this time its Toyota’s hybrid car the Prius, Toyota’s forefront for green technology. Gas pedals are not the issue with the Prius but its brake pedal instead. where many Toyota drivers in Japan and the US have encountered sporadic unresponsive braking.

The Toyota car models being recalled are 2009-10 Corolla, 2009-10 RAV4, 2009-10 Matrix, 2007-10 Camry, 2005-10 Avalon, 2007-10 Tundra, 2010 Highlander, and 2008-10 Sequoia. If you drive any of these models, you should inform your dealer and have them take care of the issue. Should you experience a glitch with your accelerator, you must step on the brake pedal with one strong stomp instead of little by little and pull-up the handbrake.

Stuart Pudge writes for Motor-Speak.com whose visitors can catch up on all the latest cool car gadgets and anything to do with cars and driving. Visit today